IMPORTANT FEATURES & BENEFITS
Excellent adhesion and high strength.
Excellent heat Resistant.
IMI BOND is a solvent based single component adhesive based on synthetic rubber with special tackifier and additives. It is specially developed to fix bituminous protection board to protect the bituminous waterproofing membrane. It is very good in film forming nature which gives uniform bonding.
Suitable for bonding of Bituminous sheets, EPDM, leather, shoe material, composite panels, wood & aluminum items, boards, steel, carpet flooring, plastic rubber sheets and other items as well.
Surface Preparation: The surface should be structurally sound, clean, dry, leveled and free from dust, dirt curing compounds & grease. Clean the surface thoroughly to remove all loosely adhering particles & cement laitance.
APPLICATION METHOD : Apply IMI BOND evenly with brush, roller, spray gun or pressure feeding equipment evenly on both surfaces, wait until solvent is fully evaporated which takes approx. 15 mins or when the adhesive applied becomes tacky. Special care must be taken on the edges and adhesive must be evenly applied. Take care to position the material accurately as they cannot be adjusted by sliding. Next firmly press the top using a seam roller/ a press to ensure evenly pressure applied to the entire surface. IMI BOND has a good initial grab, however pressure applied only by hand is not sufficient to obtain optimum results it is essential to press evenly over the entire surface in all cases. Do not leave the material coated with contact adhesive to dry in a damp or dusty environment; props/support can be utilized to keep the boards in place till the adhesive is strong enough to hold the protection board.