Seamless conforms easily to complex details and irregular surface profiles.
Highly elastic cures to form rubber like membrane.
Elongation 1000 %
Self healing to minor punctures.
Dynamic structural crack bridging capability of more than 40 mm
Simple and quick application.
LASTEEK E500 is impervious to water and when fully protected and subjected to normal service conditions, LASTEEK E500 will provide an effective barrier to the transmission of liquid water and water vapor.
LASTEEK E500 has excellent adhesion to correctly prepared substrate without the need for a primer.
Wet area; under tiles in bathrooms, kitchens & shower areas.
DPC & Arrest rising dampness.
Cellar walls and basement.
Culvert and manholes.
Gutters & retaining walls
All substrates must be clean free from dirt, dust, soil, grease, oil and other loose particles, clean using wire brush. Cracks, holes and damaged surface must be filled and repaired.
Apply LASTEEK E500 using a wide nylon brush, sheepskin disposable rollers or airless spray. The product must not be applied in wet or freezing conditions or if these conditions are likely to occur before the coating has dried. The product is always applied in 2 equal coats, allowing the first to coat to dry fully before a second coat or protection is applied. Normal re-coat time is 12 hours. Make sure that the container is kept closed after each application. The applied coating should not be exposed to UV rays for longer period.
Clean tools using white spirit or Hydrocarbon solvents.
LASTEEK E500 is robust product not affected by chlorides, sulphates, phosphates or dilute acids found in ground water for application.